Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.
Velo Orange's take on multi-hand-position handlebars, The Crazy Bar: half cruiser bar, half bull horns. Intended for touring, with multiple hand positions allowing the rider to move their hands around the bar during long stretches in the saddle. The main grip area is 22.2mm and fits mountain bike grips, flat bar brake levers and shifters. The bull horns are 23.8mm and fit bar end shifters or reverse brake levers. 25.4mm clamp area. Bull horns are 23.8mm so road levers/bar end shifters fit. Main bar is 22.2mm so MTB grips, levers and shifters fit. - Weight: 860g - Backsweep: 45° - Lever Compatability: Mountain 22.2mm and Road 23.8mm
$85.00 - $95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
The B17 is Brooks most popular saddle. Appropriate for most general purpose bikes. Ideal for the touring bike or commuter. This saddle is usually comfortable right out of the box, and break in only makes it better!! We stock a lot of the most popular Brooks saddles, and are happy to special order any of their line for you!
Back in the day, we drilled holes in our chainrings to make them lighter. The weight savings were minimal, but they sure looked cool. Velo Orange's Drillium Crankset recaptures the look. It's based on their Grand Cru 110 cranks with a very low 150mm Q-factor. And, while it may look like a vintage crank, the Drillium is cold forged in modern high-strength alloy. The 7075 alloy chainrings are highly durable, featuring ramps and pins for fast and smooth shifting with 6-10 speed drivetrains. The crank arms have classically styled reliefs, and the alloy dust caps function as self extractors with the supplied crank bolts. - Spindle interface: square taper JIS - BCD: 110mm - Weight: 645g
Page 1 of 1