Racks

Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.

- Oversized 10mm AL-6061 tubular alloy - Double frame design adds stiffness and helps stabilize panniers while offering two different attachment points - Stainless steel dropouts and hardware - Top surface width: 110mm - For 26-inch and 700c wheel bikes - Max capacity

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm

Axiom's Streamliner Road DLX Rack is designed to fit on road bikes that don't have eyelets. It's made of reliable, light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Axiom's Streamliner Disc DLX Rack fits on bikes with disc brakes that don't have eyelets. It's made of reliable and light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Axiom's Flip-Flop LX Spring Seatpost Rack is perfect for hard-to-fit bikes like full-suspension models, ones with disc brakes and those without frame eyelets. This easy on/off quick-release rack is made of light and strong hand- and double-welded tubular 6061 T6 aluminum and it boasts a flip-flop support arm for mounting the rack in a high or low position, which lets it fit on most bicycles. There's ample carrying capacity with a spacious top platform that's perfect for trunk bags (sold separately) and that includes a spring-loaded bar to hold down things. You can also slide off the platform with the bag attached for convenience, and slide the platform in when not in use so it takes up less space.

Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.

Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.

Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Sunlite's QR-Tec Front Rack replaces your front skewer with its built-in quick-release for easy, secure mounting. Made from lightweight tubular aluminum, the QR-Tec Rack is durable enough for daily commutes and light enough for long tours. It has a capacity of up to 45 pounds and its side struts support panniers.

- Features T-Twist (patented) adjustable arms - Compatible with most disc brakes - T-Track mono stay included - Oversized 10mm AL-6061 tubular alloy - Detachable stainless steel dropouts - 6cm of set back for improved heel clearance - M5 threaded holes on dropouts to mount fender stays - Top surface width: 90 to 128mm - For 26-inch / 700C wheels (max tire 29 x 2.1-inches)

Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty

Ideal for daily essentials, about-town errands, and weekend tours, Thule's Pack 'n Pedal Tour Rack is a quick and easy solution for almost every bike, from fully rigid hybrids to full suspension mountain bikes. The unique attachment system secures to your bike in a flash, and fits on either your fork or your seat stays. Once attached, it's silent, secure, and safe for any frame material. The Tour Rack includes side rails so you can mount panniers to increase your carrying capacity.

Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in

Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.